HOME UPS SYSTEMS - LOWER KVA
Features of Exide Inverterz Magic
- Wide Mains Input Voltage Range 100V - 290V
- Controlled Output Voltage
- Suitable for Mains Low Voltage Operation, 8 - 10 AMP Charging at 120V Mains Input
- ASIC (Auto Sense Intelligent Control) technology for battery charging which automatically sense battery condition & adjust the charging current accordingly
- Soft Touch ON/OFF, Mode Selection & Charging Selection Switch
- Smart In-built Protections - Overload, Short Circuit, AC Back Feed, Battery Low, Battery over Charge, Mains Overload through Resettable Switch, Over Temperature etc.
Technical SPECIFICATIONS of Exide Inverterz Magic
PARAMETERS |
MODEL | ||
| MAGIC 625 | MAGIC 825 | MAGIC 1500 | |
VA Rating |
12V,625 VA | 12V, 825 VA | 24 V, 1500 VA |
I/P Voltage Range(Normal Mode) |
100 V - 290 V ± 10V | ||
I/P Voltage Range(UPS Mode) |
180V - 265V ± 10V | ||
O/P Voltage Range |
235 V ± 15 V | ||
O/P Frequency |
50 Hz ± 1Hz | ||
O/P Wave Form |
Square Wave | ||
Battery Low Alarm |
10.8 V ± 0.2 V | 21.6 V ± 0.4 V | |
Battery Low Cut Off |
10.5 V ± 0.2 V | 21.0 V ± 0.4 V | |
Full Load Discharging Current |
40A ± 2A | 53A ± 2A | 46A ± 2A |
Nominal Battery Voltage |
12V | 24 V | |
Maximum Charging Current (HC) |
13A ± 1.5 A | 14A ± 1.5 A | 17A ± 1.5 A |
Maximum Charging Current (NC) |
9.5A ± 1.5 A | 10A ± 1.5 A | 12.5A ± 1.5 A |
No Load Battery Current |
≤ 2.0 A | ||
Peak Efficiency |
≥ 85% | ||
| UPS MODE | NORMAL MODE | |
Changeover Time (Mains to Back-up) |
≤ 10 msec* | ≤ 40 msec* |
Changeover Time (Back-up to Mains) |
≤ 10 msec* | ≤ 10 msec* |
*at mains low & high out.
Exide Premium Home UPS System is a high-end DSP based Pure Sine Wave Home UPS with Grid Quality Power Output which guarantees 100% protection and long life of your electrical and electronic appliances.
Applications of Exide Pure Sine Wave - GQP
- DSP (Digital Signal Processor) based Pure Sine Wave Home UPS and Grid Quality Power same as Mains
- ASIC (Automatic Sense Intelligent Control) Technology - Automatically senses battery condition and adjusts charging current accordingly and thus increases battery life and minimizes water topping.
- Programmed inbuilt Cooling Fan which operates automatically when needed
- Electrolyte Level Sensor indicator - Indicating Battery Water Level Low (Optional)
- Mains bypass facility
- LCD Display for better user Interface and displaying the State of Battery Voltage, AC Mains Input Voltage, Actual Applied Load in %age, Overload Protection, Short Circuit Trip Protection, Battery Low Pre Alarm and Trip Protection, AC Mains Fuse Blown Indication as FUSE TRIP & UPS/Normal Mode Selection
- Protection - Inbuilt high-precision quality protection into Main PCB
Specifications of Exide Pure Sine Wave - GQP
- Mains AC Lower Voltage Limit : 100V ± 10V in Inverter Mode
- Mains AC Lower Voltage Limit : 180V ± 10V in UPS Mode
- Mains AC Higher Voltage Limit : 280V ± 10V in Inverter Mode
- Mains AC Higher Voltage Limit : 260V ± 10V in UPS Mode
- Output Voltage at No Load : 220V ± 7V AC
- Output Wave Form at No Load : Pure Sine Wave
- Home UPS Output Frequency : 50 ±1.0Hz
- Low Battery Cut Off : 10.5 ± 0.2 V
- Change over time Mains to UPS and vice versa : < 10 msec (at mains Low and High cut)
Exide XTATIC Home UPS System is a high-end DSP based Pure Sine Wave Home UPS that guarantees 100% protection and long life of your electrical and electronic appliances.
Applications of Exide XTATIC
- DSP (Digital Signal Processor) based Pure Sine Wave Home UPS and Grid Quality Power same as Mains
- ASIC (Automatic Sense Intelligent Control) Technology - Automatically senses battery condition and adjusts charging current accordingly and thus increases battery life and minimizes water topping.
- Programmed inbuilt cooling fan which operates automatically when needed
- LED Display: Different Color LEDs for better user Interface
Mains ON Green Color LED Back-up ON Blue Color LED Charging/ Charged Green Color LED Battery Low Red Color LED Short Circuit/ Overload Red Color LED - Protection: High quality protection built up in the PCB
Specifications of Exide XTATIC Pure Sine Wave
- Mains AC Lower Voltage Limit : 100V ± 10V in Inverter Mode
- Mains AC Lower Voltage Limit : 180V ± 10V in UPS Mode
- Mains AC Higher Voltage Limit : 280V ± 10V in Inverter Mode
- Mains AC Higher Voltage Limit : 260V ± 10V in UPS Mode
- Output Voltage at No Load : 220V ± 7V AC
- Output Wave Form at No Load : Pure Sine Wave
- Home UPS Output Frequency : 50 ± 1.0Hz
- Low Battery Cut Off : 10.5 ± 0.2 V
- Change over time Mains to UPS and vice versa : < 10 msec (at mains Low and High cut)
Exide ECO Home UPS System is a high-end Microcontroller based Pure Sine Wave Home UPS which guarantees 100% protection and long life of your electrical and electronic appliances.
Features of CHLORIDE HomeUPS
- Microcontroller based Pure Sine Wave Home UPS
- ASIC (Automatically Sense Intelligent Control) Technology - Automatically senses battery condition and adjusts charging current accordingly and thus increases battery life and minimizes water topping
- Programmed inbuilt cooling fan which operates automatically when needed
- Low Voltage Charging Facility 8Amp Charging Current at 120V AC Mains Input
- Wide Mains Voltage Range for Charging
- LED Display*: Different Color LEDs for better user Interface
Mains ON Green Color LED Back-up ON Blue Color LED Charging/ Charged Green Color LED Battery Low Red Color LED Short Circuit/ Overload Red Color LED
Specifications of Exide ECO
- Mains AC Lower Voltage Limit : 90V ± 10V in Inverter Mode
- Mains AC Lower Voltage Limit : 180V ± 10V in UPS Mode
- Mains AC Higher Voltage Limit : 300V ± 10V in Inverter Mode
- Mains AC Higher Voltage Limit : 260V ± 10V in UPS Mode
- Output Voltage at No Load : 220V ± 7V AC
- Output Wave Form at No Load : Pure Sine Wave
- Home UPS Output Frequency : 50 ± 1.0Hz
- Low Battery Cut Off : 10.5 ± 0.2 V
- Change over time Mains to UPS and vice versa : < 10msec (at mains Low and High cut)
CHLORIDE HomeUPS is a revolutionary Products that protects Computers from Power Cuts, short circuit and other unwanted damages. It's Auto Sense Intelligent Control (ASIC) customizes the wave form required by your computer there by keeping it 100% safe.
SOLAR PHOTOVOLTAIC MODULE (SPV) can be used in Solar Lantern, Solar Home Light / Street Light, Off Grid Solar Power, Solar Power Pack / Generators, Solar Power Plant, Grid connector Power System. It's available size is 3Wp to 250 Wp.
Features of SOLAR PHOTOVOLTAIC MODULE (SPV)
- Chloride Photovoltaic Module uses the best available technology & raw materials.
- White tempered glass (thickness 3.2/4.0mm) and EVA resin with back sheet provides maximum protection from severe environmental condition.
- High torsional strength and corrosion resistant anodized aluminium frame provides maximum structural strength and ease of installation.
- Available in DC 12V, 24V system.
- Output lead wire Terminal with waterproof connector for higher wattage module.
- All modules comply with MNRE Govt of India, IEC 61215 & EN 61730 specification.